Samsung Galaxy S Plus I9001 has updated with Value Pack XXKQG Gingerbread 2.3.6 Firmware Update

Galaxy S Plus I9001 has updated with Value Pack XXKQG Gingerbread 2.3.6 Firmware Update. Samsung Galaxy S Plus i9001 comes with Android OS v2.3 and a powerful 1.4 GHz single core Scorpion processor. It has 4.0 inches Super AMOLED Plus capacitive touchscreen with 16M colors and 480 x 800 pixels resolution. Samsung Galaxy S Plus i9001 has 5 MP camera with autofocus, LED flash plus a Secondary VGA camera and Video recording at 720p@30fps. The phone has Bluetooth v3.0 with A2DP, Wi-Fi 802.11 b/g/n, DLNA, Wi-Fi hotspot and 3G data transfer at HSDPA 14.4 Mbps; HSUPA 5.76 Mbps. It’s not a custom ROM firmware and this update is released in select countries. Since it’s a global update, it can be applied on all the devices which are not network locked devices. This update ropes in many new features which we have summed up below. This 2.3.6 Gingerbread update is dubbed as XXKQG Update.

samsunggalaxysplusi90011

Features XXKQG Firmware:

  • ICS Lock screen & Photo Editor Tools,
  • Improved Stability & Performance,
  • Face Unlock Feature is pre-installed,
  • Take photos while recording video,
  • Force Close issues while playing HD games is now addressed,
  • Higher RAM Memory allocation to user,
  • Better Battery Backup

Read our full article to know the installation procedure:

Disclaimer: This XXKQG Gingerbread 2.3.6 Firmware is only compatible with Galaxy S Plus I9001. Neither we nor developer are responsible for any error occurred while updating firmware from our procedure. But don’t worry if any issues occur we are committed to help you in solving the same.

Pre-Requisites for updating XXKQG Gingerbread 2.3.6 Firmware

1. Backup all your data properly, so that after applying this firmware you can restore all your data back to its own place. You can take help from this Titanium Backup tool

2. Charge your battery at least 80% so that no power interruption during the process.

3. Enable the USB Debugging in your Galaxy S Plus I9001 from the path “Settings > Applications > Development > USB debugging”. The USB Debugging option should be ticked.

4. Disable all security programs like antivirus and firewall. Also disable Kies for Samsung.

5. Download the XXKQG firmware package. Extract the firmware zip file to get two files, I9001XXKQG_I9001XXKPL_I9001NEELE1_HOME.tar.md5 & SS_DL.dll which is just a supporting file.

6. Download the Odin.

 

Step by step guide to install XXKQG on Galaxy S Plus I9001

Step1. Open odin from the extracted folder in your computer.

Step2. On your mobile go to the Download Mode. Download mode can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.

Step3. Now as you are in download Mode connects it with the PC while Odin will be opened.

Step4. You will see in Odin that the ID:Com section will turn yellow that means your drivers are installed correctly.

Note: If it does’t turn yellow then you must install the drivers of your device by Samsung Kies.

Step5. Click on “PDA” tab and select the file “I9001XXKQG_I9001XXKPL_I9001NEELE1_HOME.tar.md5” which you can find from extracted files and click on “Start”. It will take around 4 – 5 minutes to update the device.

Step6. Once the device is updated successfully, it will be rebooted and home screen will be shown.

Note:  if you are facing Force close issue then use this tips

Step7. Turn Off the phone to enter the device in the recovery mode. Recovery mode can be entered by pressing Volume up Key, Center button, and holding both simultaneously press the Power Button.

Step8. In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now with the help of Volume rocker keys.

Step9. Just reboot and you are completed.

That’s it now your device after restart land on new Custom rom.

Note: If the firmware update interrupts between the middle of the process.  Then you need to reinsert the battery and apply the update again by following the steps again from the start. Don’t forget to restore the backup which you have taken in the initial steps:

 

Other reached here searching for:

    remics jb i9001, gingerbread value pack with facelock free download for samsung galaxy s plus gt i9001, aries ops galaxy s plus, jelly bean dla gt-i9001, latest firmware from samsung 2 3 6 gingerbread xxkqg, прошивка 19001 xxkqg samsung 19001, root 9001 2 3 6 xxkqg, rom oficial samsung galaxy s plus i9001 gingerbread twp, remics-jb-i9001, remics-jb v2 i9001, i9001 jelly bean official update, remics i9001, official value pack for i9001 cons, s plus i9001 secret code, samsung 2 3 6 gingerbread xxkqg, samsung galaxy gt-i9001 jelley bean md5, xxkqg-update-galaxy-s-plus-i9001-with-android-2-3-6-gingerbread, update i9001 to jelly bean odin, scaricare aries ops galaxy s plus, samsungi9001 jelly bean

2 thoughts on “Samsung Galaxy S Plus I9001 has updated with Value Pack XXKQG Gingerbread 2.3.6 Firmware Update

  1. Where did u get flash man.. This fone doesn’t have flash.I’m using it

  2. j ravichandran says:

    Update to xxkqg failed through odin 3.183.got stuck at setupconnection
    Tried thro odin multi loader 4.3.3.it requires aries ops file as.update got stuck at 3rd stage after 35 minutes.tried again after reinserting
    batteries.tried again after unticking ops in 4.3.3 and this time suc
    ceeded.but it took all of 92 minutes.at 3rd stage took a long time

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title="" rel=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>