Galaxy Tab 7.7 Gets DXLB3 Ice Cream Sandwich Android 4.0 firmware update : SamsungMobileClub

Today we would discuss about how to Update Galaxy Tab 7.7 to Latest release firmware DXLB3 Easily with One Click Odin File. Samsung Galaxy Tab 7.7 comes with Android OS v3.2 (Honeycomb) and Dual-core 1.4GHz ARM Cortex-A9 Processor. It has 7.7 inches Super AMOLED Plus Capacitive Touch screen and 800 x 1280 pixels resolution. Samsung Galaxy Tab 7.7 has Primary 3.15 MP camera and Secondary 2 MP camera plus Video recording at 720p@30fps. The Tablet has Wi-Fi 802.11 a/b/g/n, Wi-Fi hotspot and 3G data transfer at HSDPA 21 Mbps, HSUPA 5.76 Mbps. All thanks for these update goes to XDA modder as i9000.

Disclaimer: This DXLB3 firmware is only compatible with Samsung Galaxy Tab 7.7. Neither we nor developer are responsible for any error occurred while updating firmware from our procedure. But don’t worry If any issues occur we are committed to help you in solving the same.

1. Download 32Bit Download 64Bit the Drivers for your Samsung Galaxy Tab 7.7.

2. Backup all your data properly, so that after applying this firmware you can restore all your data back to its own place. You can take help from this Tutorial

3. Uninstall all security programs like firewall and antivirus and also Kies. (If you are facing Driver problem then you can use Kies but after using it disable the problem)

4. Download OR Download DXLB3 firmware package.

5. Download the Odin software which generally helps to flash the DXLB3 firmware on your Galaxy Tab 7.7.

Step by step guide to install DXLB3 firmware on your Galaxy Tab 7.7:

Step1. Extract the Rom file downloaded on the pre-requisites section (P6800DXLB3_P6800OLBLB1_P6800DXLB1_HOME_ROOT_DEODEX.exe). After extraction you will get actual firmware file. (named P6800DXLB3_P6800OLBLB1_P6800DXLB1_HOME_ROOT_DEODEX.tar.md5 after extraction)

Step2. Now, just switch off your TAB to Boot Galaxy Tab 7.7 into Download Mode. You can go to download mode by holding these keys together: Volume Down + Home + Power.

Step3. Go to your PC, and double click on Odin which you have downloaded on pre-requisites.

Step4. Now connect your TAB to the PC while Odin running. You will see the message “Added! !” under Odin’s message box in the bottom left.

Step5. Now, go to the PDA section in Odin, and then select the P6800DXLB3_P6800OLBLB1_P6800DXLB1_HOME_ROOT_DEODEX.tar.md5 file which you have got while the extraction in Step 1.

Note: Do not touch any other sections or buttons.

Step6. Now click on START button to start flashing DXLB3 firmware. When the flashing procedure is finished, your tab will automatically reboot.

Note 1: You’ll get a PASS (with green background) message in the left-most box at the very top of Odin. Then you will see the Samsung logo on your TAb that means you can safely unplug the cable.

Note 2: If ODIN gets stuck at some stage and doesn’t seem to be doing anything, simply disconnect the tab from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and repeat the same procedure again.

That’s it you have successfully updated your Galaxy Tab 7.7 to DXLB3 Ice Cream Sandwich Android 4.0 firmware.

Other reached here searching for:

galaxy tab 7 7 ics wifi problem, download dxlb3 firmware, galaxy 7 7 firmware update, tab7 7 software upgrade, tab7 7 update with odin, UNBRICKED tab 7 7 USING FIRMWARE EXE FILE, which is the best firmware jb for samsung 7 7

Tagged with